EIB 3392 S
Depending on the connected encoder and subsequent electronics, suited for applications up to
26 · 10–9 (with respect to an operating altitude of ≤ 1000 m above sea level)
Due to the connected encoder and the subsequent electronics (i.e. through the configuration); the EIB has no influence on the safe position
EnDat22 (Note the requirements on the encoder)
Various connectors (see ''Versions of the EIB 3392 S”)
Encoder supply voltage (UP2)
DC 8.0 V ±0.4 V, max. 1800 mW
≤ 30 m1)
≤ 30 m2)
Voltage supply (UP1)
DC 24 V (16.0 V to 28.8 V)(up to DC 36.0 V possible without impairing functional safety)
Maximum At 16.0 V: ≤ 3200 mW At 28.8 V: ≤ 3300 mW
Typical At 24 V: 1000 mW + 1.15 x PMtyp (with PMtyp = typical power consumption of the encoder)
0 °C to 60 °C
–30 °C to 70 °C
Vibration 55 Hz to 2000 Hz
Shock 11 ms
100 m/s2 (IEC 60 068-2-6)
200 m/s2 (IEC 60 068-2-27)
Protection EN 60 529
≈ 0,2 kg (with 1 m cable length on both sides)
1) With HEIDENHAIN cable; note the power supply at the encoder.
2) Depending on the output cable; the plug connection to the EIB is to be considered a DRIVE-CLiQ coupling.
3) Use the correct connector version
DRIVE-CLiQ is a registered trademark of SIEMENS AG.
EIB 3392 S - External Interface Box in Cable Design
이 사이트는 쿠키를 사용합니다. 페이지가 제대로 표시되고, 모든 기능을 최적으로 사용할 수 있도록 쿠키의 사용에 동의하여 주시기 바랍니다.
개인정보 보호 정책 보기